18W Indirect LED Bollard Light
LA.5010 is a cylindrical LED bollard light for pedestrian paths, parks and landscaped developments. Its flared head uses secondary reflection to deliver indirect light, with a PMMA refractor around the optical assembly.
The published configuration lists 18W power and 600mm or 900mm heights. A die-cast aluminum body, electrostatic coating and concealed flange fixing create a clean appearance, with finish, height and control options available for project review.
Product Specifications
| Attribute | Description |
|---|---|
| Model | LA.5010 |
| Power | 18W, as listed on the product page |
| Housing | Die-cast aluminum alloy |
| Surface Finish | Electrostatic coating; custom colors available on request |
| Refractor | PMMA |
| Light Distribution | Secondary-reflection indirect lighting |
| Published Optics | 160° |
| Dimensions | Ø260 × 600mm / Ø260 × 900mm |
| Body Diameter | Ø160mm in the supplied dimension drawing |
| Weight | 5.6kg / 7.8kg; confirm selected height |
| Luminous Efficiency | 40–50 lm/W |
| Input Voltage & Frequency | 90–305V AC, 50/60Hz |
| Control | Single-color constant-on; optional dimming and presence sensing by configuration |
| Color Temperature | 2700K / 3000K / 4000K / 5000K |
| Ingress / Impact Protection | IP54 / IK10, as published |
| Electrical Protection Class | Class I / Class II options listed; confirm selected configuration |
| Corrosion Protection | WF1 |
| Ambient Temperature | −45°C to +40°C |
| Ambient Humidity | 10–95% RH |
| Published Adjustment | 360°; adjustment mechanism to be confirmed |
| Installation | Concealed fixing flange |
| Customization | Housing color, height, dimming and sensing functions on request |
Confirm the LA.5010 configuration before ordering: the source parameter block carries a T.621 heading. Ratings, dimensions and electrical class require model-specific confirmation.
Product Model Comparison
| Specification | LA.5010 |
|---|---|
| Dimension Drawings |  |
| Published Power | 18W |
| Published Size Options | Ø260 × 600mm / Ø260 × 900mm |
| Body Diameter in Drawing | Ø160mm |
| Published Weight Options | 5.6kg / 7.8kg |
| Published Luminous Efficiency | 40–50 lm/W |
| Published Optics | 160° |
The supplied drawing shows both heights. Confirm the selected size, corresponding weight and fixing details with the final LA.5010 specification.
Product Design & Lighting Features
Indirect Light for Pedestrian Landscapes
The optical assembly uses secondary reflection to create indirect illumination around the bollard head. The design is intended to soften the appearance of the light in pedestrian settings.
Use project photometric data to set spacing and assess illumination along paths, entrances and landscaped edges.
Aluminum Housing with a PMMA Refractor
The light body is made from die-cast aluminum alloy with an electrostatically applied surface coating. A PMMA refractor forms the light-transmitting part of the head. Custom surface colors can be discussed to coordinate the bollard with paving, planting and surrounding architecture.
Two Published Heights and Concealed Fixing
The product page shows 600mm and 900mm heights with a 260mm head diameter. The original drawing also identifies a 160mm body diameter.
A concealed fixing flange supports a neat installed appearance. Additional height requirements can be reviewed for the project.
Project-Specific Dimming and Sensing
The listed standard control is single-color constant-on operation. Dimming and presence-sensing functions can be configured to suit the required operating schedule.
Discuss dimmed levels, sensor behavior and the control interface when specifying the light; the page does not identify a particular dimming protocol.
Optical Distribution
The product table lists 160° optics. The supplied curve has no model or beam-angle identifier; request matching photometric data for the selected LA.5010 configuration.
Bollard Lighting for Outdoor Spaces
LA.5010 is designed for parks, villas, walking trails and landscaped areas around commercial and industrial developments. Coordinate bollard height, finish and light levels with the pedestrian layout.
AI-generated application illustrations. Fixture appearance and lighting effects are illustrative; confirm the selected model and layout with project photometric data.
Parks and Walking Trails
Indirect landscape lighting for pedestrian routes and planted areas. Establish spacing from the confirmed photometric file and the required path illuminance.
Villas and Residential Landscapes
Bollard lighting for garden paths and landscaped entrances. Coordinate color temperature and housing finish with the surrounding architecture.
Commercial Streets
Low-level lighting along pedestrian edges and landscaped frontage. Review placement in relation to circulation routes and other street furniture.
Industrial Park Landscapes
Lighting for landscaped paths and leisure areas within industrial developments. Optional dimming and sensing can be reviewed against site operating needs.
Request a Quote for 18W Indirect LED Bollard Light
Share your quantity, preferred height, housing finish, color temperature and control requirements. Our team can confirm the LA.5010 configuration, fixing details and matching photometric data for your project.
